Chapter 148 SUBDIVISION AND LAND DEVELOPMENT. (updated 7-28-08)

Section 148-39 MONUMENTS.

A.  Location:  right-of-way.  Monuments capable of location by metal detection shall be set at all points of tangent and points of curve in each new street.  Monuments shall be at least thirty (30) inches long and three (3) inches in diameter or three (3) inches square.  The top of each monument shall have an appropriate mark to properly identify the location and shall be set flush with the finished grade.  Following completion of road work, a steel pin shall be placed to mark the center of each new street intersection and the radius  point of each new cul-de-sac.

B.  Location:  lot corners.  All lot corners shall be marked with steel rods not less than one-half (1/2) inch in diameter and twenty-four (24) inches long, driven flush with the finished grade.

C.  All required monuments shall be installed by the subdivider.  Upon completion of subdivision streets, sewers and other improvements, the subdivider shall make certain that all monuments required by the town are clearly visible for inspection and use.  Such monuments shall be inspected and approved by the town before any improvements are accepted by the governing body.